Researches & Publications

1. Major Research Programme

  1. Technology and Equipment of Fabrication and Manufacture of High Performance Sesquioxide Crystals. National Key Research and Development Program of China, 2016.
  2. Fundamental Research on Optical Freeform Manufacturing. National Key Basic Research Program of China, 2011.
  3. Fundamental Research on Nanomanufacturing. Major Research Programme of the National Natural Science Foundation of China, 2010.
  4. Investigation and Applications on Ultra-precision Cutting of Optical Functional Material Freeform Surfaces. National High Technology Research and Development Programme of China, 2008.
  5. Fundamental Research on Nano-precision Integrated Manufactured Optical Freeform Systems. National Key Research and Development Programme of China, 2018.

2. Selected Publications

2.1 Keynote speeches and invited presentations

2019

  1. Fang F. Z., 2019, Concept and Characteristics of Manufacturing III (invited presentation), the 6th Polymer Replication on Nanoscale (PRN2019), Dublin, Ireland, May 9-10.
  2. Fang F. Z., 2019, Micro-optics design and manufacturing (keynote speech), the 6th Asia Pacific Conference on Optics Manufacture 2019 (APCOM2019), Hong Kong, China, January 7-9.

2018

  1. Fang F. Z., 2018, Design and manufacturing of structured freeform optics (keynote speech), Euspen SIG: Structured & Freeform Surfaces, Paris, France, November 27-29.
  2. Fang F. Z., 2018, Manufacturing of freeform optics (keynote speech), 14th China-Japan International Conference on Ultra-Precision Machining Process (CJUMP 2018), Harbin, China, September 13-15.
  3. Fang F. Z., 2018, Measurement of freeform optics (invited seminar), Korean Institute of Mechanical and Materials Engineering, Daejeon, Korea, April 19.

2017

  1. Fang F. Z., 2017, Towards nano manufacturing (keynote speech), the 13th China-Japan International Conference on Ultra-Precision Manufacturing Process (CJUMP2017), Shanghai, China, November 19-21.
  2. Fang F. Z., 2017, Nanomanufacturing – perspective and applications (keynote speech), the 7th International Conference of Asian Society for Precision Engineering and Nanotechnology (ASPEN2017), Seoul, Korea, November 14-17.
  3. Fang F. Z., 2017, Atomic manufacturing (invited speech), Korea Advanced Institute of Science and Technology, Korea, November 14.
  4. Fang F. Z., 2017, Ultra-precision machining of complex surfaces (keynote speech), SIG-Micro/nano Manufacturing, Europe Society for Precision Engineering and Nanotechnology (Euspen), Strathclyde, United Kingdom, July 8-10.
  5. Fang F. Z., et al, 2017, Nanomanufacturing - perspective and applications (keynote paper), the 67th General Assembly of the International Academy for Production Engineering (CIRP), Lugano, Switzerland, August 20-26.
  6. Fang F. Z., 2017, Nanomanufacturing – perspective and applications (keynote speech), 39th International MATADOR Conference on Advanced Manufacturing, Manchester, United Kingdom, July 5-7.
  7. Fang F. Z., 2017, High precision manufacturing of complex surfaces (keynote speech), Sino-German Forum on Manufacturing, Nanjing, China, May 23-25th.

2016

  1. Fang F. Z., 2016, Atomic and close-to-atomic scale manufacturing (invited lecture), International Symposium on Future-Oriented Machining 2016 (FORM 2016), Tokyo, Japan, November 21.
  2. Fang F. Z., 2016, High precision manufacturing of complex surfaces (keynote speech), 2016 International Forum on Advanced Manufacturing Technology and Equipment, Chengdu, China, November 4.
  3. Fang F. Z., 2016, Manufacturing of micro optics (keynote speech), The 5th Asia Pacific Conference on Optics Manufacture, Shanghai, China, October 30-November 2.
  4. Fang F. Z., 2016, Development and application of nano manufacturing (keynote speech), Eastern Forum of Science and Technology, Shanghai, China, October 19.
  5. Fang F. Z., 2016, Advance in optical manufacturing (invited lecture), Qinghe Forum of Shanghai Institute of Optics and Fine Mechanics Chinese Academy of Science, Shanghai, China, June 30.
  6. Fang F. Z., 2016, Manufacturing III (keynote speech), The 9th International Conference on Digital Enterprise Technology (DET2016), Nanjing, China, March 29-31.

2015

  1. Fang F. Z., 2015, The key technology of intelligent manufacturing and strategic choice of the enterprises (keynote speech), Forum of Industry 4.0 and Manufacturing 2025, Tianjin, November 27.
  2. Fang F. Z., 2015, Nanomanufacturing: challenges and opportunities (keynote speech), The 13th International Conference on Automation Technology, Taiwan, China, November 13-15.
  3. Fang F. Z., 2015, Low temperature and ultrasonic assisted carbon steel cutting and the progress (invited lecture), Taishan Academic Forum—high efficiency energy and material saving manufacturing, Zibo, Shandong, September 18-20.
  4. Fang F. Z., 2015, Manufacturing III - addressing the manufacturing development trend (invited lecture), Brunel University London, UK, September 7.
  5. Fang F. Z., 2015, Ultra-precision machining of brittle materials and carbon steel (keynote speech), The 13th Conference on Machining and Advanced Manufacturing Technology, Taiyuan, May 22-24.
  6. Fang F. Z., 2015, Machining and measurement of aspheric and freeform optical elements (invited lecture), Applied Optics and Photonics China (AOPC2015), Beijing, May 5-7.
  7. Fang F. Z., 2015, Micro machining technologies (invited lecture), University of Brescia, Italy, April 3.
  8. Fang F. Z., 2015, Manufacturing and measurement of freeform optics (keynote speech), International Conference on Optical and Photonic Engineering (icOPEN2015), Singapore, April 14-16.
  9. Fang F. Z., 2015, Nanomanufacturing: perspectives and applications (keynote speech), 4M/ICOMM 2015 Conference, Milan, Italy, March 31-April 2.
  10. Fang F. Z., 2015, Advances in Nano Mechanical Machining (keynote speech), The 38th International MATADOR Conference, Huwei, Taiwan, March 27-April 1.
  11. Fang F. Z., 2015, Nanometric cutting mechanism (keynote speech), The 8th Manufacturing Institute for Research on Advanced Initiatives (MIRAI-2015), Kaohsiung, Taiwan, March 25-26.

2014

  1. Fang F. Z., 2014, Manufacturing III (keynote speech), Precision Machining Workshop across the Taiwan Straits, Guangzhou, Guangdong, December 18-21.
  2. Fang F. Z., 2014, Manufacturing III (invited lecture), University College Dublin, Dublin, Ireland, November 11.
  3. Fang F. Z., 2014, High precision machining of complex surfaces (keynote speech), The 10th CHINA-JAPAN International Conference on Ultra- Precision Machining Process (CJUMP), Jiaozuo, Henan, October 18-19.
  4. Fang F. Z., 2014, The high precision manufacturing technology of complex surface (invited speech), Manufacturing Technology Seminar across the Taiwan Straits Supported by NSFC, Yinchuan, September 24-28.
  5. Fang F. Z., 2014, Manufacturing of freeform optics (invited speech), ASPEN/ASPE Summer Conference on Freeform Optics, Hawaii, USA, June 26-28.
  6. Fang F. Z., 2014, Nanomanufacturing perspective (invited presentation), NanoTrends2014, Nanjing, China, May 23-25.
  7. Fang F. Z., 2014, Nano machining technology (invited presentation), The 7th MIRAI Conference on Nanofabrication and Green Technology, Wako, Japan, March 27-28.
  8. Fang F. Z., 2014, Freeform optics and applications (plenary speech), The 25th Conference on Real and Virtual Manufacturing, Wroclaw, Poland, March 9-11.
  9. Fang F. Z., 2014, Evaluation of freeform lenses (invited lecture), MAFO – The Conference, Milan, Italy, February 27-28.

2013

  1. Fang F. Z., 2013, Fabrication of nano optics (invited presentation), Asian Symposium on Precision Engineering and Nanotechnology (ASPEN2013), Taipei, Taiwan, China, November 12-15.
  2. Fang F. Z., 2013, Nanomanufacturing: perspective and applications (invited speech), Taiwan University, Taipei, November 11.
  3. Fang F. Z., 2013, Manufacturing of freeform optics (keynote speech), The 15th International Manufacturing Conference in China (IMCC), Nanjing, China, October 16-18.
  4. Fang F. Z., 2013, Ultrasonic assisted machining (keynote speech), Symposium on Precision Micro Manufacturing, Taian, China, September 20-23.
  5. Fang F. Z., 2013, Advanced optical manufacturing (keynote speech), International Conference on Optics, Shenzhen, China, September 5-6.
  6. Fang F. Z., 2013, Machining of micro/nano optical elements (keynote speech), PhD. Candidates Symposium of Instrumentation and Bio-engineering, Beijing, China, September 1-2.
  7. Fang F. Z., et al, 2013, Manufacturing and measurement of freeform optics (keynote paper), The 62nd CIRP General Assembly, Copenhagen, Denmark, August 18-24.
  8. Fang F. Z., 2013, High precision complex form machining (keynote speech), Symposium of Manufacturing Frontiers, Beijing, China, July 26-28.

2012

  1. Fang F. Z., 2012, Advances in nano mechanical machining (invited presentation), The 10th International Conference on Frontiers of Design and Manufacturing (ICFDM2012), Chongqing, China, June 10-12.
  2. Fang F. Z., 2012, Development of freeform machining (keynote speech), International Symposium on Micro/nano Mechanical Machining and manufacturing (ISMNM), Matsushima, Japan, April 18-20.
  3. Fang F. Z., 2012, Fabrication of nano optics (plenary speech), The 6th SPIE International Symposium on Advanced Optical Manufacturing and Testing Technologies (AOMATT2012), Xiamen, China, April 26-29.
  4. Fang F. Z., 2012, Advances in freeform optics (invited presentation), Carl Zeiss Vision, Aalen, Germany, March 15.
  5. Fang F. Z., 2012, Advances in freeform optics (invited presentation), Ophthalmic Labs & Industry (MAFO), Milan, Italy, March 10-11.

2011

  1. Fang F. Z., 2011, Fabrication of nano optics (invited speech), The Asia Conference on Precision Engineering and Nanotechnology (ASPEN2011), Hong Kong, China, November 15-18.
  2. Fang F. Z., 2011, Nano scale fabrication of optical elements (keynote speech), The 8th National Conference on Precision Engineering, Tianjin, China, October 14-16.
  3. Fang F. Z., 2011, Manufacturing of freeform optics (keynote speech), The 14th International Manufacturing Conference in China (IMCC2011), Tianjin, China, October 13-15.
  4. Fang F. Z., 2011, Machining mechanism at multi-scale (keynote speech), The 1st Forum on Trends in Nano-Manufacturing (NanoTrends2011), Hefei, China, October 9-12.
  5. Fang F. Z., 2011, Manufacturing of freeform optics (keynote speech), Ophthalmic Optics Forum, Beijing, China, September 13.
  6. Fang F. Z., 2011, Development in manufacturing of freeform optics (plenary speech), The 1st International Conference on Manipulation, Manufacturing and Measurement on the Nanoscale (3M-Nano), Changchun, China, August 29-September 2.
  7. Fang F. Z., 2011, Advances in nano fabrication (invited seminar), Institute of Experimental Physics, Johannes Kepler University Linz, Austria, February 4.
  8. Fang F. Z., 2011, Advances in manufacturing (invited seminar), QFM University of Erlangen-Nuremberg, Erlangen, Germany, January 31.

2010

  1. Fang F. Z., 2010, Trends of manufacturing development (plenary speech), PEI General Assembly, Jinan, China, December 12-16.
  2. Fang F. Z., 2010, Machining of freeform optics (plenary speech), OSA-IEEE-COS Topical Meeting on Advances in Optoelectronics and Micro/nano-optics, Guangzhou, China, December 3-6.
  3. Fang F. Z., 2010, Mechanical processes for micro-optics (invited presentation), SPIE – Phonics Europe, Brussels, Belgium, April 12-16.

2009

  1. Fang F. Z., 2009, Nano mask fabrication based on focused ion beam milling (invited presentation), Asia Symposium for Precision Engineering and Nanotechnology (ASPEN2009), Kitakyushu, Japan, November 11-13.
  2. Fang F. Z., 2009, Advances in micro/nano fabrication (invited presentation), The 3rd MIRAI International Conference – Micro Fabrication and Green Manufacturing, Incheon, Korea, October 14-16.
  3. Fang F. Z., 2009, Manufacturing in nanometric accuracy (invited presentation), The 2nd NSFC-NSF Joint Symposium on Nanomanufacturing, Nebraska, USA, October 19-20.
  4. Fang F. Z., 2009, Functional surfaces fabrication (keynote presentation), The 1st International Conference on Surface and Interface Fabrication Technologies, Wako, Japan, July 16-17.
  5. Fang F. Z., 2009, Advances in micro/nano machining (keynote presentation), The 1st International Symposium on Atomically Controlled Fabrication Technology, Osaka, Japan, February 16-17.

2008

  1. Fang F. Z., Xu Z. W., 2008, Nanometrology for high aspect ratio features using nanotube (invited presentation), International Conference on Precision Measurement (ICPM2008), Ilmenau, Germany, September 8-12.
  2. Jin G. F., Fang F. Z., 2008, Freeform optics (keynote speech), The 1st International Conference on Nanomanufacturing (nanoMan2008), Singapore, July 13-16.
  3. Fang F. Z., Zhang X. D., 2008, Freeform machining technology, International Symposium on Functional Surface Machining (keynote speech), Bremen, Germany, June 18-20.
  4. Fang F. Z., 2008, Advances in freeform machining (invited presentation), The 3rd International Symposium on Micro/nano manufacturing, Taiwan, April 26-28.
  5. Zhang X. D., Fang F. Z., 2008, Machining and simulation of sinusoidal surfaces using cylindrical coordinate method (invited paper), The 1st International Conference on Nanomanufacturing (nanoMan2008), Singapore, July 13-16.

2007

  1. Fang F. Z., 2007, Freeform machining of optics: from concept to reality (keynote speech), Asia Symposium for Precision Engineering and Nanotechnology (ASPEN2007), Korea, November 6-9.
  2. Fang F. Z., 2007, Advances in ultra-precision machining of optical components (keynote speech), Asia Pacific Conference on Optics Manufacture (APCOM2007), Hongkong, China, January 11-13.

2006

  1. Fang F. Z., 2006, Advances in micro/nano machining (invited presentation), Hong Kong Polytechnic University, June 8.
  2. Fang F. Z., 2006, Advances in micro/nano manufacturing (keynote speech), International Conference on Micro/Nano Fabrication Technology, Bangkok, Thailand, May 10-12.

2005

  1. Fang F. Z., 2005, Fundamentals in micro machining (invited presentation), Nagoya University, Japan, October 14.
  2. Fang F. Z., 2005, Brittle-to-ductile transition in single crystal silicon (keynote speech), TMMF2005, Tsukuba, Japan, October 17.
  3. Fang F. Z., 2005, Micro machining of optical and bio-medical parts (invited presentation), Technological University of Malaysia, Malaysia, February 23.

2.2 Selected journal publications

2019

  1. Yan G. P., Fang F. Z.*. Fabrication of optical freeform molds using slow tool servo with wheel normal grinding. CIRP Annals. 2019 Apr 25.
  2. Yan G. P., Zhang Y., You K. Y., Li Z. X., Yuan Y. K., Fang F. Z.*. Off-spindle-axis spiral grinding of aspheric microlens array mold inserts. Optics Express. 2019 Apr 15;27(8):10873-89.
  3. Vo Q., Zhang X. D., Fang F. Z.*. Extended the linear measurement range of four-quadrant detector by using modified polynomial fitting algorithm in micro-displacement measuring system. Optics & Laser Technology. 2019 Apr 15;112:332-8.
  4. Krishnan A., Fang F. Z.*. Review on mechanism and process of surface polishing using lasers, Frontiers of Mechanical Engineering, 2019;.
  5. Melentiev R., Kang C., Shen G., Fang F. Z.*. Study on surface roughness generated by micro-blasting on Co-Cr-Mo bio-implant. Wear. 2019 Mar 6.
  6. Fang F. Z.*, Zhang N., Guo D., Ehmann K., Cheung B., Liu K., Yamamura K.. Towards Atomic and close-to-atomic scale manufacturing. International Journal of Extreme Manufacturing. 2019 Mar 8; 1(1): 1-31.
  7. Song Y., Xu Z., Rosenkranz A., Rommel M., Shi C., Fang F. Z.*. Surface-enhanced Raman scattering on nanodiamond-derived carbon onions. Nanotechnology and Precision Engineering. 2019 Mar 1;2(1):35-9.
  8. Li Q., Fang F. Z.*. Advances and challenges of soft contact lens design for myopia control, Applied Optics, 2019; 58(7): 1639-1656.
  9. Shen G., Zhang J. F., Fang F. Z.*. In vitro evaluation of artificial joints: a comprehensive review, Advances in Manufacturing, 2019; 7(1): 1-14.
  10. Melentieva R., Fang F. Z.*, Investigation of erosion temperature in micro-blasting, Wear, 2019; 420-421: 123-132.
  11. Lai M., Zhang X., Fang F. Z., Bi M.. Effects of crystallographic orientation and negative rake angle on the brittle-ductile transition and subsurface deformation in machining of monocrystalline germanium. Precision Engineering. 2019 Mar 1;56:164-71.
  12. Zhang Y., Yan G., Li Z., Fang F. Z.*, Quality improvement of collimating lens produced by precision glass molding according to performance evaluation. Optics express. 2019 Feb 18;27(4):5033-47.
  13. Wang Y., Li Z., Fu Z., Fang F. Z., Zhang X. Radial scan form measurement for freeform surfaces with large curvature using stylus profilometry. Measurement Science and Technology. 2019 Feb 7.
  14. Wang Z., Zhang J., Xu Z., Zhang J., ul Hassan H., Li G., Zhang H., Hartmaier A., Fang F. Z., Yan Y., Sun T.. Crystal plasticity finite element modeling and simulation of diamond cutting of polycrystalline copper. Journal of Manufacturing Processes. 2019 Feb 1;38:187-95.
  15. Wang J., Zhang X., Fang F. Z.*, Chen R.. Diamond cutting of micro-structure array on brittle material assisted by multi-ion implantation. International Journal of Machine Tools and Manufacture. 2019 Feb 1;137:58-66.
  16. Han W., Fang F. Z.*. Fundamental aspects and recent developments in electropolishing. International Journal of Machine Tools and Manufacture. 2019 Jan 4.
  17. Yan G., You K., Fang F. Z.*. Three-linear-axis grinding of small aperture aspheric surfaces. International Journal of Precision Engineering and Manufacturing-Green Technology. 2019:1-2.
  18. Wu D., Wang B., Fang F. Z.* Effects of tool wear on surface micro-topography in ultra-precision turning. The International Journal of Advanced Manufacturing Technology. 2019:1-1.
  19. Musgrave C.S., Fang F. Z.*. Contact lens materials: A materials science perspective. Materials. 2019 Jan;12(2):261.
  20. Shi C., Luo H., Xu Z., Fang F. Z.*. Nitrogen-vacancy color centers in diamond fabricated by ultrafast laser nanomachining. In Simulation and Experiments of Material-Oriented Ultra-Precision Machining 2019 (pp. 277-305). Springer, Singapore.
  21. Chen R., Wang J., Fang F. Z.*, Zhang X.. Influence of buried modified layer on crack propagation and diamond turning of silicon. Precision Engineering. 2019 Jan 1;55:426-32.

2018

  1. Vo Q. S., Fang F. Z., Zhang X. D., Zhu L. L., Reducing the residual focus error signal in optical pickup head astigmatism displacement systems using the signal conditioning method, Applied Optics, 2018; 57(34): 9972-9980
  2. Melentiev R., Fang F. Z.*, Theoretical study on particle velocity in micro-abrasive jet machining, Powder Technology, 2018;
  3. Fang F. Z.*, Gu C. Y., Hao R., You K. Y., Huang S. Y., Recent progress in surface integrity research and development, Engineering, 2018;
  4. Wang J. S., Zhang X. D., Fang F. Z.*, Chen R. T., A numerical study on the material removal and phase transformation in the nanometric cutting of silicon, Applied Surface Science, 2018; 455: 608-615.
  5. Mathew P. T., Fang F. Z.*, Advances in molecular electronics: a brief review, Engineering, 2018;
  6. Fang F. Z., Preface, Nanomanufacturing and Metrology, 2018; 1(1): 1.
  7. Liu B.*, Fang F. Z., Li R., Xu Z. W., Liang Y. S., Experimental study on size effect of tool edge and subsurface damage of single crystal silicon in nano-cutting, International Journal of Advanced Manufacturing Technology, 2018; 98: 5-8.
  8. Yu N., Fang F. Z.*, Wu B., Zeng L., Cheng Y., State of the art of intraocular lens manufacturing, International Journal of Advanced Manufacturing Technology, 2018; 98: 5-8.
  9. Zheng X., Li Z. X., Zhang X. D., Fang F. Z., Manufacturing-constrained optical design methodology for cylindrical freeform reflective imaging system, Optics Express, 2018; 26: 17.
  10. Xu Z. W., He Z. D., Song Y., Fu X., Rommel M., Luo X. C., Hartmaier A., Zhang J. J., Fang F. Z., Topic review: application of Raman spectroscopy characterization in micro/nano-machining, Micromachines, 2018; 9: 7.
  11. Zhang H. Y., Fang F. Z.*, Gilchrist M. D., Zhang N., Filling of high aspect ratio micro features of a microfluidic flow cytometer chip using micro injection moulding, Journal of Micromechanics and Microengineering, 2018; 28: 7.
  12. Jia Z. G., Xu K., Fang F. Z.*, Effective wavefront aberration measurement of spectacle lenses in as-worn status, Measurement Science and Technology, 2018; 29: 4.
  13. Li Z. X., Liu X. L., Fang F. Z., Zhang X. D.*, Zeng Z., Zhu L. L., Yan N., Integrated manufacture of a freeform off-axis multi-reflective imaging system without optical alignment, Optics Express, 2018; 26: 6.
  14. Zhu L. L., Li Z. X., Fang F. Z., Huang S. Y., Zhang X. D.*. Review on fast tool servo machining of optical freeform surfaces, International Journal of Advanced Manufacturing Technology, 2018; 95: 5-8.
  15. Xu F. F., Fang F. Z.*, Zhang X. D.. Effects of recovery and side flow on surface generation in nano-cutting of single crystal silicon, Computational Materials Science, 2018; 143.
  16. Liu X. L., Zhang X. D.*, Fang F. Z., Zeng Z., Performance-controllable manufacture of optical surfaces by ultra-precision machining. International Journal of Advanced Manufacturing Technology, 2018; 94: 9-12.
  17. Zhang L., You Y. S., Fu Y. Q.*, Xu Z. W., Fang F. Z., A simplified and cost-effective optical absorber and corresponding photo-thermal effect, Plasmonics, 2018; 13: 265-268.
  18. Fang F. Z.*, Shih A., Lai, Y. A., Tao F., Nee, A. Y. C., Editorial for the special issue on innovative design and applications, International Journal of Advanced Manufacturing Technology, 2018; 94: 9-12.
  19. Cao Y., Fang F. Z.*, Compensation for deformation of turned ultra-thin parts, Nanotechnology and Precision Engineering, 2018; 1: 1. (in Chinese)
  20. Li C., Guo Y. B.*, Fang X. Y., Fang F. Z., A scalable predictive model and validation for residual stress and distortion in selective laser melting, CIRP Annals-Manufacturing Technology,2018; 67: 1.
  21. Pang K., Song L.*, Fang F. Z., Large field of view curved compound eye imaging system using optical freeform surface, Journal of Optoelectronics·Laser, 2018; 29: 1. (in Chinese)
  22. Wang, J. S., Chen R. T., Zhang X. D., Fang F. Z.*, Study on machinability of silicon irradiated by swift ions, Precision Engineering-Journal of The International Societies for Precision Engineering and Nanotechnology. 2018; 51.
  23. Gao H. M., Fang F. Z., Zhang X. D.*, Li N., Tolerance Analysis of Laser Scanning System Based on Unified Field Tracing Theory, Laser & Optoelectronics Progress, 2018; 54: 12. (in Chinese)
  24. Fang F. Z.*, Chen X. F., Zhang X. D., Li Z. X., Development of fast tool servo control system based on Maxwell normal force using ADRC algorithm, Nanotechnology and Precision Engineering, 2018; 15:5. (in Chinese)
  25. Wang S. L., Fang F. Z.*, High power laser and its development, Laser & Optoelectronics Progress, 2018; 54:9. (in Chinese)
  26. Zhang N., Zhang H. Y., Stallard C., Fang F. Z.*, Gilchrist M., Replication integrity of micro features using variotherm and vacuum assisted microinjection moulding. Procedia CIRP, 2018; 71: 390-395.
  27. Zhang Y. F., Fang F. Z.*, Huang W., Wang C., Fan W., Polishing technique for potassium dihydrogen phosphate crystal based on magnetorheological finishing, Procedia CIRP, 2018; 71: 21-26.
  28. Zhang X. D., Li L. H.*, Li Z. X., Chan C. Y., Zhu L. L.,Lee W. B., Fang F. Z., Highly uniform manufacturing method for large-area microlens arrays, International Journal of Advanced Manufacturing Technology, 2018; 95(1-4): 99-108.
  29. Cheng Y., Fang F. Z.*, Lu Y. B., Zhang X. D., Numerical design method for conic curved Fresnel lens, Infrared and Laser Engineering, 2018; 47:7. (in Chinese)
  30. Fu X., Xu Z. W.*, He Z. D., Hartmaier A., Fang F. Z., Molecular dynamics simulation of silicon ion implantation into diamond and subsequent annealing, Nuclear Instruments and Methods in Physics Research, 2018;
  31. Yan G. P., You K. Y., Fang F. Z.*, Ultraprecision grinding of small-aperture concave aspheric mould insert with tilt axis method, Procedia CIRP, 2018; 71:505-510.
  32. Yuan, Y. K., Gu C. Y., Yan G. P., Fang F. Z.*, Mechanical property and modal analysis of ultra-thin mirrors, Chinese Journal of Scientific Instrument, 2018; 39(6): 64-72. (in Chinese)
  33. Li X. H., Xing Y. L., Fang F. Z.*, Liu P. L., Su Z. K., Multi-parameter measurement method based on combined surface reference, Infrared and Laser Engineering, 2018; 47: 7. (in Chinese)
  34. Melentiev R., Fang F. Z.*, Recent advances and challenges of abrasive jet machining, CIRP Journal of Manufacturing Science and Technology, 2018; 22: 1-20.
  35. Zeng L., Fang F. Z.*, Advances and challenges of intraocular lens design, Applied Optics, 2018; 57: 25.
  36. Li Z. J., Jin G.*, Fang F. Z., Gong H., Jia H. l., Ultrasonically assisted single point diamond turning of optical mould of tungsten carbide, Micromachines, 2018; 9(2): 77
  37. Kang C. W., Fang F. Z.*, State of the art of bioimplants manufacturing: part I ,Advances in Manufacturing, 2018; 6(1): 20-40.
  38. Kang C. W., Fang F. Z.*, State of the art of bioimplants manufacturing: part II ,Advances in Manufacturing, 2018; 6(2): 137-154.
  39. Higginbottom D., Campbell G., Araneda G.,Fang F. Z., Colombe Y., Buchler C.,Lam P. K., Fabrication of ultrahigh-precision hemispherical mirrors for quantum-optics applications, Nature, 2018; 8: 221.
  40. He Z. D., Xu Z. W.*, Rommel M., Yao B. T., Liu T., Song Y., Fang F. Z., Investigation of Ga ion Implantation induced damage in single-crystal 6H-SiC, Journal of Micromanufacturing, 2018; 1(2): 115-123.

2017

  1. Jiang L. L., Zhang X. D.*, Fang F. Z., Nonlinear phase error compensation for fringe deflectometry measuring system, International Journal of Nanomanufacturing, 2017; 14(2): 115.
  2. Gao H. G., Zhang X. D.*, Fang F. Z., Study on errors analysis and accuracy improvement for aspheric profile measurement, Measurement Science and Technology, 2017; 28(6): 065004.
  3. Zhang X. D., Li L.*, Chan C. Y., Li Z. X., Zhu L. L., Lee W. B., Fang F. Z., Highly uniform manufacturing method of large-area microlens array, International Journal of Advanced Manufacturing Technology, 2017.
  4. Gao H. M., Zhang X. D.*, Fang F. Z., Interferometry of a reflective axicon surface with a small cone angle using an optical inner surface, Measurement Science And Technology, 2017; 28(9)
  5. Jiang L. L., Zhang X. D.*, Fang F. Z., Liu X. L., Zhu L. L., Wavefront aberration metrology based on transmitted fringe deflectometry, Applied Optics, 2017; 56(26): 7396-7403.
  6. Vo Q. S., Fang F. Z., Zhang X. D.*, Gao H. M., Surface recovery algorithm in white light interferometry based on combined white light phase shifting and fast Fourier transform algorithms, Applied Optics, 2017; 56(29): 8174-8185.
  7. Li Z. X., Fang F. Z., Zhang X. D.*, Liu X. L., Gao H. M., Highly efficient machining of non-circular freeform optics using fast tool servo assisted ultra-precision turning, Optics Express, 2017; 25(21): 25243-25256.
  8. Wang Y. M., Li Z. X., Liu X. L., Fang F. Z., Zhang X. D.*, Freeform-objective Chernin multipass cell: application of a freeform surface on assembly simplification, Applied Optics, 2017; 56(30): 8541-8546.
  9. Fang F. Z*., Zhang X. D., Gao W., Guo Y. B., Byrne G., Hansen H. N., Nanomanufacturing- perspective and applications, CIRP Annals-Manufacturing Technology, 2017; 66(2): 683-705
  10. Jia Z. G., Xu K, Fang F. Z.*, Measurement of spectacle lenses using wavefront aberration in real view condition, Optics Express, 2017; 25(18): 22125-22139.
  11. Xu K. Jia Z. G., Fang F. Z.*, Measurement of Transmission Wavefront Aberration of Freeform Spectacle Lenses in Real Viewing Condition, Acta Optica Sinica, 2017; 38(02):0212001.
  12. Xu F. F., Fang F. Z.*, Zhu Y. Q., Zhang X. D., Study on crystallographic orientation effect on surface generation of aluminum in nano-cutting, Nanoscale Research Letters, 2017; 12.
  13. Lai M., Zhang X. D., Fang F. Z.*, Crystal orientation effect on the subsurface deformation of monocrystalline germanium in nanometric cutting, Nanoscale Research Letters, 2017; 12.
  14. Pang K., Fang F. Z., Song L.*, Zhang Y., Zhang H. Y., Bionic compound eye for 3D motion detection using an optical freeform surface, Journal of The Optical Society of America B-Optical Physics, 2017; 34(5): 28-35.
  15. Lai M., Zhang X. D., Fang F. Z.*, Bi M. H., Fundamental investigation on partially overlapped nano-cutting of monocrystalline germanium, Precision Engineering, 2017, Published online.
  16. Li Z. X., Fang F. Z., Chen J. J., Zhang X. D.*, Machining approach of freeform optics on infrared materials via ultra-precision turning, Optics Express, 2017; 25(3), 2051-2062.
  17. Wang J. S., Fang F. Z., Zhang X. D.*, Nanometric cutting of silicon with an amorphous-crystalline layered structure: a molecular dynamic study, Nano Research Letter, 2017; 12: 41.

2016

  1. Huang K. T., Zhang Z. Y., Gong H.*, Li Z. J., Fang F. Z., Wang D. F., Constructing smooth tool orientation field based on radial basis function for 5-axis machining, The International Journal of Advanced Manufacturing Technology,2016;
  2. Xu Z. W., Wang L. Y., Fang F. Z.*, Fu Y. Q., Yin Z., Review on colloidal self-assembly and their applications, Current Nanoscience. 2016; 12(6): 725-746(22).
  3. Fang F. Z.*, Atomic and close-to-atomic scale manufacturing - A trend in manufacturing development, Frontiers of Mechanical Engineering. 2016; 11(4): 325-327.
  4. Qiu Z. J.*, Liu C. C., Wang H. R., Yang X., Fang F. Z., Crack propagation and the material removal mechanism of glass-ceramics by the scratch test, Journal of the Mechanical Behavior of Biomedical Materials. 2016; 64: 75-85.
  5. Fang F. Z.*, Zhang N., Zhang X. D. Precision injection molding of freeform optics. Advanced Optical Technologies. 2016; 5(4): 303–324.
  6. Gao W. L., Yang B., Lawrence M., Fang F. Z., Beri B.*, Zhang S. Photonic Weyl degeneracies in magnetized plasma. Nature Communication. 2016; 7:12435.
  7. Song L., Zheng Y. L.*, Hu G., Ma J. Y., Werner T., Zhao M. R., Fang F. Z., Highly sensitive, precise, and traceable measurement of force. Instrumentation Science & Technology. 2016; 44: 386-390.
  8. Fang F. Z.*, Zeng Z., Zhang X. D., Jiang L. L., Measurement of micro-V-groove dihedral using white light interferometry. Optics Communications. 2016; 359: 297-303.
  9. Liu X. L., Zhang X. D., Fang F. Z.*, Identification and compensation of main machining errors on surface form accuracy in ultra-precision diamond turning. International Journal of Machine Tools & Manufacture. 2016; 105: 45-57.
  10. Wang Y., Gong H.*, Fang F. Z., Ni H., Kinematic view of the cutting mechanism of rotary ultrasonic machining by using spiral cutting tools. International Journal of Advanced Manufacturing Technology. 2016; 83: 461-464.
  11. Li C., Fu C. H., Guo Y. B.*, Fang F. Z., A multiscale modeling approach for fast prediction of part distortion in selective laser melting. Journal of Materials Processing Technology. 2016; 229: 703-712.
  12. Pang K., Song L., Fang F. Z.*, Zhang Y., Zhang H. Y., An imaging system with a large depth of field based on an overlapped micro-lens array. CIRP Annals - Manufacturing Technology. 2016; 65(1): 471-474.
  13. Zhu P. Z., Fang F. Z.*, Study of the minimum depth of material removal in nanoscale mechanical machining of single crystalline copper. Computational Materials Science. 2016; 118: 192-202.
  14. Wang J. S., Zhang X. D., Fang F. Z. Molecular dynamics study on nanometric cutting of ion implanted silicon. Computational Materials Science. 2016; 117: 240-250.
  15. Brieussel A., Shen Y., Campbell G., Guccione G., Janousek J., Hage B., Buchler B. C., Treps N., Fabre C., Fang F. Z., Li X. Y., Symul T., Lam P.K.*, Squeezed light from a diamond-turned monolithic cavity. Optics Express. 2016; 24: 4042-4056.
  16. Wang Z. Q., Gong H., Fang F. Z., Liu B., Recognition of wear condition of micro milling tool based on length fractal dimension, Journal of Vibration, Measurement and Diagnosis.2016; 36(3): 592-597.(in Chinese)
  17. Tian F., Liu X. L., Zhang X. D., Fang F. Z.*, Influence of manufacture error on optical performance of micro lens array, Acta Optica Sinica. 2016; 36(2):178-186. (in Chinese)
  18. Duan W., Gong H.*, Wang Y., Fang F. Z., Rotary ultrasonic machine of pre-stressed holes in optical fiber preforms, Nanotechnology and Precision Engineering. 2016; 2:130-133. (in Chinese)
  19. Dong J. C., Gong H.*, Zeng Q. Y., Wang Y., Duan W., Fang F. Z., Measurement of transient cutting temperature in ultra-precision turning based on thin-film thermocouple, Nanotechnology and Precision Engineering, 2016; 14(2): 310-314. (in Chinese)
  20. Liu L. P., Lin B., Fang F. Z.*, Design and experimental study of an air bearing workbench for rotary ultrasonic drilling, Machinery Design and Manufacture. 2016; 9: 108-110. (in Chinese)

2015

  1. Zhang X. D., Jiang L. L., Zeng Z., Fang F. Z.*, Liu X. L., High angular accuracy manufacture method of micro v-grooves based on tool alignment by on-machine measurement, 2015, 23(21):27819-27828.
  2. Xiao Y. J., Fang F. Z.*, Xu Z. W., Hu X. T. Annealing recovery of nanoscale silicon surface damage caused by Ga focused ion beam. Applied Surface Science. 2015; 343: 56-69.
  3. Fang F. Z.*, Liu B., Xu Z. W., Nanometric cutting in a scanning electron microscope. Precision Engineering-Journal of the International Societies for Precision Engineering and Nanotechnology. 2015; 41: 145-152.
  4. Chen W. H., Zhang X. D.*, Liu X. L., Fang F. Z., Optical design and simulation of a compact multi-aperture camera based on a freeform microlens array. Optics Communications. 2015; 338: 300-306.
  5. Zheng Y. L., Song L.*, Hu G., Cai X., Liu H. G., Ma J. Y., Zhao M. R., Fang F. Z., The multi-position calibration of the stiffness for atomic-force microscope cantilevers based on vibration. Measurement Science & Technology. 2015; 26(5): 055001.
  6. Gong H., Wang Y., Song L.*, Fang F. Z., Spiral tool path generation for diamond turning optical freeform surfaces of quasi-revolution. Computer-Aided Design. 2015; 59: 15-22.
  7. Wang J. S., Fang F. Z.*, Zhang X. D., An experimental study of cutting performance on monocrystalline germanium after ion implantation. Precision Engineering-Journal of the International Societies for Precision Engineering and Nanotechnology. 2015; 39: 220-223.
  8. Gao W. L., Fang F. Z.*, Liu Y. M., Zhang S., Chiral surface waves supported by biaxial hyperbolic metamaterials. Light-Science & Applications. 2015; 4: e308.
  9. Gao W. L., Lawrence M., Yang B. A., Liu F., Fang F. Z., Beri B., Li J. S., Zhang S,*. Topological photonic phase in chiral hyperbolic metamaterials. Physical Review Letters. 2015; 114(3): 037402.
  10. Fang F. Z.*, Xu F. F., Lai M., Size effect in material removal by cutting at nano scale. International Journal of Advanced Manufacturing Technology. 2015; 80(1-4): 591-598.
  11. Huang K. T., Gong H.*, Fang F. Z., Li Z., Generation of spherical non-uniform rational basis spline curves and its application in five-axis machining. Proceedings of the Institution of Mechanical Engineers Part B-Journal of Engineering Manufacture. 2015; 229(7): 1104-1117.
  12. Liu X. L., Zhang X. D., Fang F. Z.*, Zeng Z., Gao H. M., Hu X. T., Influence of machining errors on form errors of microlens arrays in ultra-precision turning. International Journal of Machine Tools & Manufacture. 2015; 96: 80-93.
  13. Qiu Z. J.*, Yang X., Zheng H., Gao S., Fang F. Z., Investigation of micro-injection molding based on longitudinal ultrasonic vibration core. Applied Optics. 2015; 54(28): 8399-8405.
  14. Wang J., Fu Y. Q.*, Xu Z. W., Fang F. Z., Near-field visualization of plasmonic lenses: an overall analysis of characterization errors. Beilstein Journal of Nanotechnology. 2015; 6: 2069-2077.
  15. Wang Z. Q., Fang F. Z., Liu B., Wang Z. Y.*, An experimental method for eliminating effect of rigid out-of-plane motion on 2D-DIC. Optics and Lasers in Engineering. 2015; 73: 137-142.
  16. Yu J., Fang F. Z.*, Qiu Z. J., Aberrations measurement of freeform spectacle lenses based on Hartmann wavefront technology. Applied Optics. 2015; 54(5): 986-994.
  17. Han Q., Fu Y. Q.*, Jin L., Zhao J. J., Xu Z. W., Fang F. Z., Gao J. S., Yu W. X., Germanium nanopyramid arrays showing near-100% absorption in the visible regime. Nano Research. 2015; 8(7): 2216-2222.
  18. Hu X.T., Xu Z. W., Li K., Fang F. Z., Wang L. Y., Fabrication of an Au-polystyrene sphere substrate with three-dimensional nanofeatures for surface-enhanced Raman spectroscopy. Applied Surface Science. 2015; 355: 1168-1174.
  19. Liu B., Fang F. Z.*, Xu Z. W., Zhang X. D., Design of five-axis ultrasonic assistant compound machine tool. Transactions of Tianjin University. 2015; 21(4): 312-316.
  20. Wang Z. Q., Gong H.*, Fang F. Z., Micro hole machining using double helix electrodes in electro discharge machining. Journal of Central South University (Science and Technology). 2015; 46(8): 2857-2862.(in Chinese)
  21. Zhang N., Srivastava A., Kirwan B., Byrne R., Fang F. Z., Browne D. J., Gilchrist M. D.*, Manufacturing microstructured tool inserts for the production of polymeric microfluidic devices. Journal of Micromechanics and Microengineering. 2015; 25(9): 095005.
  22. Zhang X. D., Zeng Z., Liu X. L., Fang F. Z.*, Compensation strategy for machining optical freeform surfaces by the combined on- and offmachine measurement. Optics Express. 2015; 23(19): 24800-10.
  23. Pan L., Gong H.*, Fang F. Z., Ultra-precision polishing process of large freeform surface aluminum mirror, Nanotechnology and Precision Engineering, 2015; 13(2): 108-12.(in Chinese)
  24. Fang F. Z.*, “Manufacturing III” is the strategic choice for manufacturing development. People’s Forum. 2015; 0(16): 59-61.(in Chinese)
  25. Fang F. Z.*, Suggestions to promoting the implements of “Manufacturing III”. People’s Daily, 2015.6.30.(in Chinese)
  26. Chai Z. Y., Wang Q. C., Zeng Z., Zhang X. D.*, Fang F. Z., Generation of optical vortex array using a wedge array. Acta Photonica Sinica. 2015; 0(4): 71-5.(in Chinese)
  27. Fang F. Z., Zhang H. Y., Song L.*, Pang K., Zhang Y., Development of fabrication and application of artificial compound eye system. Nanotechnology and Precision Engineering. 2015; 13(6):434-42. (in Chinese)

2014

  1. Cheng Y., Fang F. Z.*, Zhang X. D., Design of an ultra-small aspect ratio concentrator. Optical Engineering. 2014; 53(11): 115105.
  2. Fang F. Z., Huang K. T., Gong H.*, Li Z. J., Study on the optical reflection characteristics of surface micro-morphology generated by ultra-precision diamond turning. Optics and Lasers in Engineering. 2014; 62: 46-56.
  3. Gao H. M., Fang F. Z., Zhang X. D.*, Reverse analysis on the geometric errors of ultra-precision machine. International Journal of Advanced Manufacturing Technology. 2014; 73(9-12): 1615-1624.
  4. Nie Y. H., Fang F. Z.*, Zhang X. D., System design of Maxwell force driving fast tool servos based on model analysis. International Journal of Advanced Manufacturing Technology. 2014; 72(1-4): 25-32.
  5. Qiu C., Zhu P. Z., Fang F. Z.*, Yuan D. D. Shen X. C., Study of nanoindentation behavior of amorphous alloy using molecular dynamics. Applied Surface Science. 2014; 305: 101-110.
  6. Wu W., Xu Z. W., Fang F. Z.*, Liu B., Xiao Y. J. Chen J. P., Wang X. B., Liu H. Z., Decrease of FIB-induced lateral damage for diamond tool used in nano cutting. Nuclear Instruments & Methods in Physics Research Section B-Beam Interactions with Materials and Atoms. 2014; 330: 91-98.
  7. Yu J., Qiu Z. J.*, Fang F. Z., Mathematical description and measurement of refractive parameters of freeform spectacle lenses. Applied Optics. 2014; 53(22): 4914-4921.
  8. Chen Y., Han H., Fang F. Z.*, Hu X. T., MD simulation of nanometric cutting of copper with and without water lubrication. Science China-Technological Sciences. 2014; 57(6): 1154-1159.
  9. Zhu P. Z., Qiu C., Fang F. Z.*, Yuan D. D., Shen X. C., Molecular dynamics simulations of nanometric cutting mechanisms of amorphous alloy. Applied Surface Science. 2014; 317: 432-442.
  10. Zheng Y. L., Song L.*, Hu G., Zhao M. R., Tian Y. L., Zhang Z. H., Fang F. Z., Improving environmental noise suppression for micronewton force sensing based on electrostatic by injecting air damping. Review of Scientific Instruments. 2014; 85(5): 055002.
  11. Zhu P. Z., Fang F. Z.*, On the mechanism of material removal in nanometric cutting of metallic glass. Applied Physics A-Materials Science & Processing. 2014; 116(2): 605-610.
  12. Chen Y. H., Fang F. Z.*, Zhang X. D., Hu X. T., Molecular dynamics of nanometric processing of ion implanted monocrystalline silicon surfaces. Transactions of Tianjin University. 2014; 20(3): 203-209.
  13. Fang F. Z., Wan Y., Zhu P. Z.*, Cheng Y., Three-dimensional displacement measurement system based on optical free-form surface. Transactions of Tianjin University. 2014; 47(10): 934-942. (in Chinese)
  14. Li Z. J., Fang F. Z.*, Gong H. Molecular dynamics simulation of physical effect of water in nanometric cutting. Transactions of Tianjin University, 2014; 47(12): 1109-1114.(in Chinese)
  15. Li Z. J., Gong H, Tong W. P., Fang F. Z.*, Yang C., Experimental study of diamond turnability of iron nitride. Transactions of Tianjin University. 2014; 47(9): 785-789.(in Chinese)
  16. Xing X. D., Xu Z. W., Gao H. F., Fang F. Z.*, Liu B., Study on ringing artefacts of carbon nanotube probes of atomic forcemicroscopy. International Journal of Nanomanufacturing. 2014; 10(3): 215-228.
  17. Zhang Q., Fang F. Z.*, Xu Z. W., Gao T. T., Gao W. L., A novel method for SERS active substrates based on Au/PDMS self-assembled nanocracks. Special Issue on Precision Engineering and Nanotechnology. 2014; 404-414.
  18. Fang F. Z.*, Zhang X. D., Nanocutting fundamentals and key technologies. China Academic Journal Electronics. 2014; (5): 357-359.(in Chinese)
  19. Fang F. Z.*, Nanomanufacturing research and progress. China Basic Science. 2014; 16(5): 9-15.(in Chinese)
  20. Fang F. Z.*, Lai M., Nanocutting techonology and progress. Science China. 2014; (10): 1052-1070.(in Chinese)
  21. Zhang X., Song L.*, Zhang S. S., Fang F. Z., The method for the calibration and measurement of bionic compound-eye system. Opto-Electronic Engineering. 2014: 41(3): 35-42.(in Chinese)
  22. Zhang S. S., Song L.*, Zhang X., Fang F. Z., A compact high-speed 3D tracking module based on a compound eye camera. Journal of Optoelectronic Laser. 2014; 9(26): 1796-1802.(in Chinese)
  23. Fang F. Z., Ni H, Gong H.*, Rotary ultrasonic machining of hard and brittle materials. Nanotechnology and Precision Engineering. 2014; 12(3): 227-234.(in Chinese)
  24. Wu Q. Q., Zhang X. D., Fang F. Z., Zhang L., Shape measurement of the cubic phase plate with wavefront sensing technology. Optical Technique. 2014; 40(2): 105-112.(in Chinese)
  25. Chen Y. H., Fang F. Z., Li Y. F., Wang Q. Y., Hu X. T., Investigation on fly-cutting of ion-implanted brittle material for enhancement of THz wave output. Aviation Precision Manufacturing Technology. 2014; (2): 1-3.(in Chinese)
  26. Fang F. Z.*, Yu, J., Qiu, Z. J., Measurement and evaluation of freeform spectacle lenses - part II, MAFO. 2014; 11(4): 34-40.
  27. Fang F. Z.*, Yu, J., Qiu, Z. J., Measurement and evaluation of freeform spectacle lenses - part I, MAFO. 2014; 10(3): 16-19.

2013

  1. Fang F. Z.*, Zhang X. D., Weckenmann A., Zhang G. X., Evans C., Manufacturing and measurement of freeform optics. CIRP Annals-Manufacturing Technology. 2013; 62(2): 823-846.
  2. Gong H., Fang F. Z.*, Zhang X. F., Du J., Hu X. T., Study on the reduction strategy of machining-induced edge chipping based on finite element analysis of in-process workpiece structure. Journal of Manufacturing Science and Engineering-Transactions of the ASME. 2013; 135(1): 0110171-10.
  3. Hu X. K., Li Y. F., Fang F. Z., Li X., Li J., Chen Y. H., Zhang X. D., Chai L., Wang C. Y., Fedotov A. B., Zheltikov A. M.*, Enhancement of terahertz radiation from GaP emitters by subwavelength antireflective micropyramid structures. Optics Letters. 2013; 38(12): 2053-2055.
  4. Lai M., Zhang X. D.*, Fang F. Z., Nanoindentation-induced phase transformation and structural deformation of monocrystalline germanium: a molecular dynamics simulation investigation. Nanoscale Research Letters. 2013; 8(1): 1-9.
  5. Lai M., Zhang X. D., Fang F. Z.*, Wang Y. F., Feng M., Tian W. H., Study on nanometric cutting of germanium by molecular dynamics simulation. Nanoscale Research Letters. 2013; 8(1):124-132.
  6. Li Z. J., Fang F. Z.*, Gong H., Zhang X. D., Review of diamond-cutting ferrous metals. International Journal of Advanced Manufacturing Technology. 2013; 68(5-8): 1717-1731.
  7. Song L., Fang F. Z.*, Zhao J. B., Study on viscosity measurement using fiber Bragg grating micro-vibration. Measurement Science & Technology. 2013; 24(1):111-123.
  8. Xiao Y. J., Fang F. Z.*, Xu Z. W., Wu W., Shen X. C., The study of Ga+ FIB implanting crystal silicon and subsequent annealing. Nuclear Instruments & Methods in Physics Research Section B-Beam Interactions with Materials and Atoms. 2013; 307: 253-256.
  9. Xu Z. W., Xu L. H., Fang F. Z.*, Gao H. F., Li W. L., Carbon nanotube’s modification by focused ion beam irradiation and its healing strategies. Nuclear Instruments & Methods in Physics Research Section B-Beam Interactions with Materials and Atoms. 2013; 307: 203-206.
  10. Yuan D. D., Zhu P. Z.*, Fang F. Z., Qiu C., Study of nanoscratching of polymers by using molecular dynamics simulations. Science China- Physics Mechanics & Astronomy. 2013; 56(9): 1760-1769.
  11. Zhang X. D., Fang F. Z.*, Wu Q. Q., Liu X. L., Gao H. M., Coordinate transformation machining of off-axis aspheric mirrors. International Journal of Advanced Manufacturing Technology. 2013; 67(9-12): 2217-2224.
  12. Zhang X. D., Fang F. Z.*, Yu L. H., Jiang L. L., Guo Y. W., Slow slide servo turning of compound eye lens. Optical Engineering. 2013; 52(2): 023401.
  13. Zhao C. Y., Gong H.*, Fang F. Z., Li Z. J., Experimental study on the cutting force difference between rotary ultrasonic machining and conventional diamond grinding of K9 glass. Machining Science and Technology. 2013; 17(1): 129-44.
  14. Li G. H., Xu Z. W., Fang F. Z.*, Wu W., Xing X. D., Li W. L., Liu H. Z., Micro cutting of V-shaped cylindrical grating template for roller nano-imprint. Journal of Materials Processing Technology. 2013; 213(6): 895-904.
  15. Hu X. K., Li Y. F., Fang F. Z., Li X., Li J., Chen Y. H., Zhang X. D., Chai L., Wang C. Y., Fedotov A. B., Zheltikov A. M.*, Enhancement of terahertz radiation from GaP emitters by subwavelength antireflective micropyramid structures. Optics Letters. 2013; 38(12): 2053-2055.
  16. Qiu Z. J., Fang F. Z.*, Zhao Q. Z., Zhou L. B., Online image measurement method for micro-round nose diamond turning tools. Journal of Mechanical Engineering. 2013; 49(17): 26-32.
  17. Xu F. F., Zhang X. D., Fang F. Z.*, Characterization of single point diamond machined single-crystal silicon. Nanotechnology and Precision Engineering. 2013; 11(6): 485-491.(in Chinese)
  18. Du J., Li Z. J., Gong H.*, Fang F. Z., Study on the mechanisms and control method of edge chipping fracture in the machining of brittle and hard materials. Mechanical Science and Technology. 2013,32(10);1451-1455.(in Chinese)
  19. Duan Q., Qiu Z. J., Fang F. Z. Near infrared heating method and device study on micro-injection mould. China Plastics Industry. 2013; 41(12): 32-35.(in Chinese)
  20. Chen X. W., Zhang X. D., Fang F. Z., Simulating nanometric cutting mechanism of single-crystal copper with quasicontinuum numerical method. Mechanical Science and Technology. 2013; 32(8): 1098-1102.(in Chinese)
  21. Fang F. Z., Xu Z. W., Technology and progress of nano machining using focused ion beam. Transactions of the Heilongjiang University of Science and Technology. 2013; (3): 211-221.(in Chinese)
  22. Qiu Z. J.*, Yi P., Lu C., Fang F. Z., Mechanical property analysis of modified quartz glass. Journal of Materials Science and Engineering. 2013; (1): 6-10.(in Chinese)
  23. Huang K. T., Fang F. Z., Gong H., Effect of surface microscopic topology generated by ultra-precision turning on optical characteristics. Optics and Precision Engineering. 2013; 21(1): 101-107.(in Chinese)
  24. Fang F. Z.*, ChengY., Zhang X. D., Design of freeform optics. Advanced Optical Technologies. 2013; 2(5-6): 445-453.
  25. Li Z. J., Fang F. Z.*, Gong H., Review of diamond-cutting ferrous metals. International Journal of Advanced Manufacturing Technology. 2013; 1(15): 1717-1731.
  26. Li Z. J., Fang F. Z., Gong H., Zhang X. D., Effects of surface modifications on steel’s machinability in single-point diamond turning. International Journal of Precision Technology. 2013; 3(2): 105-116.
  27. Zhang X. D., Wang Q. C., Fang F. Z.*, Liu X. L., Controllable fabrication of freeform optics. International Journal of Precision Technology. 2013; 3(3): 277-289.
  28. Wang J., Fu Y. Q., Xu Z. W., Fang F. Z.*, Influence of interaction between fiber probe and sample surface on near-field probing of plasmonic structures. Quantum Matter. 2013; 2(4): 289-295.

2012

  1. Chen Y. H., Fang F. Z.*, Xu Z. W., Zhang X. D., Hu X. T., Surface modification for brittle monocrystalline materials by MeV ions. Nuclear Instruments & Methods in Physics Research Section B-Beam Interactions with Materials and Atoms. 2012; 272: 433-436.
  2. Cheng Y., Fang F. Z.*, Zhang X. D., Design and manufacture of off-axis optical reflective integrator with faceted structure. Optical Engineering. 2012; 51(9): 1487-1489.
  3. Gao T. T., Xu Z. W., Fang F. Z.*, Gao W. L., Zhang Q., Xu X. X., High performance surface-enhanced Raman scattering substrates of Si-based Au film developed by focused ion beam nanofabrication. Nanoscale Research Letters. 2012; 7(1): 399.
  4. Gong H., Fang F. Z.*, Hu X. T., Accurate spiral tool path generation of ultraprecision three-axis turning for non-zero rake angle using symbolic computation. International Journal of Advanced Manufacturing Technology. 2012; 58(9-12): 841-847.
  5. Ju B. F. *, Chen Y. L., Zhang W., Fang F. Z., Rapid measurement of a high step microstructure with 90 degrees steep sidewall. Review of Scientific Instruments. 2012; 83(1): 013706.
  6. Ju B. F.*, Chen Y. L., Zhang W., Zhu W. L., Jin C., Fang F. Z., Long range and accurate measurement of deep trench microstructures by a specialized scanning tunneling microscope. Review of Scientific Instruments. 2012; 83(5): 056106.
  7. Lai M., Zhang X. D., Fang F. Z.*, Study on critical rake angle in nanometric cutting. Applied Physics A-Materials Science & Processing. 2012; 108(4): 809-818.
  8. Liu L. P., Lin B., Fang F. Z.*, Design of a novel air bearing workbench for rotary ultrasonic drilling of advanced ceramics. Journal of Mechanical Design. 2012; 134(9): 255-274.
  9. Tang X., Fu Y. Q.*, Xu Z. W., Fang F. Z., Li J. M., Hu X. T., The size effect of periodic metallic nanoholes array in surface enhance Raman scattering substrate. Journal of Computational and Theoretical Nanoscience. 2012; 9(8): 1125-1128.
  10. Xu Z. W., Fang F. Z.*, Gao H. F., Zhu Y. B., Wu W., Weckenmann A., Nano fabrication of star structure for precision metrology developed by focused ion beam direct writing. CIRP Annals-Manufacturing Technology. 2012; 61(1): 511-514.
  11. Zhu P. Z., Fang F. Z.*, Molecular dynamics simulations of nanoindentation of monocrystalline germanium. Applied Physics A-Materials Science & Processing. 2012; 108(2): 415-421.
  12. Zhu P. Z.*, Hu Y. Z., Fang F. Z., Wang H., Multiscale simulations of nanoindentation and nanoscratch of single crystal copper. Applied Surface Science. 2012; 258(10): 4624-4631.
  13. Dong Y. H., Zhang X. F., Fang F. Z., Qiu Z. J., Gong H., Study on integrated machine tool with ultrasonic assisted grinding for brittle and hard materials and process. Journal of Huazhong University of Science and Technology . 2012; 40(SUPPL.2): 113-116.(in Chinese)
  14. Guo Y. W.*, Zhang X. D., Wu Q. Q., Fang F. Z., Design of freeform prism based on toleranceing principle. Optical Technique. 2012; 258(10): 4624-4631.
  15. Zhu P. Z., Fang F. Z., Study on nanometric cutting process of single crystal silicon based on multiscale method. Journal of Heilongjiang Institute of Science and Technology. 2012; 22(4): 348-353. (in Chinese)
  16. Zhao C. Y., Gong H., Fang F. Z.*, Experimental investigation on the surface quality in rotary ultrasonic grinding of cemented carbide. Mechanical Science and Technology. 2012; 31(10): 1584-1587.
  17. Wang H. Y., Qiu Z. J., Lu R. J., Fang F. Z., Design and analysis of clamping mechanism for desktop model micro-injection molding machine. Engineering Plastics Application. 2012; 40(8): 54-58.
  18. Qiu Z. J.*, Zheng H., Fang F. Z., Wang H. Y., Longitudinal ultrasound-assisted micro-injection moulding method. Nanotechnology and Precision Engineering. 2012; 10(2): 170-176.

2011

  1. Fang F. Z.*, Chen Y. H., Zhang X. D., Hu X. T., Zhang G. X., Nanometric cutting of single crystal silicon surfaces modified by ion implantation. CIRP Annals-Manufacturing Technology. 2011; 60(1): 527-530.
  2. Liu L. P.*, Lin B., Fang F. Z., Monitoring of tool wear in rotary ultrasonic machining of advanced Ceramics. Advanced Manufacturing Technology, Pts 1-3. 2011; 314-316: 1754-1759.
  3. Liu L. P., Lin B.*, Fang F. Z., Study on a novel adaptive force control table employed for rotary ultrasonic drilling. Information Engineering for Mechanics and Materials Science, Pts 1 and 2. 2011; 80-81: 1027-1031.
  4. Liu Y., Fu Y. Q.*, Zhou X. L., Xu Z. W., Fang F. Z., Hu X. T., Experimental study of indirect phase tuning-based plasmonic structures for finely focusing. Plasmonics. 2011; 6(2): 227-233.
  5. Qiu Z. J., Fang F. Z.*, Ding L. Y., Zhao Q. Z., Investigation of diamond cutting tool lapping system based on on-machine image measurement. International Journal of Advanced Manufacturing Technology. 2011; 56(1-4): 79-86.
  6. Fang F. Z.*, Nie Y. H., Zhang X. D., Design of fast tool servo system based on magnetic field analysis. Nanotechnology and Precision Engineering. 2011; 9(6): 539-544. (in Chinese)
  7. Zhao H. X., Qiu Z. J., Fang F. Z.*, Effect of ultrasonic vibration on the rheological behavior of polymer in micro-channel. China Plastics Industry. 2011; 39(12): 63-67. (in Chinese)
  8. Zheng H., Qiu Z. J., Fang F. Z., Experimental investigation on micro injection molding for fresnel lens. Engineering Plastics Application. 2011; 39(12): 39-42. (in Chinese)
  9. Nie Y. H., Fang F. Z.*, Zhang X. D., Sun C. K., Design of ultrafast tool servo based on FEA magnetic analysis. Modern Manufacturing Engineering. 2011; (7): 1-5. (in Chinese)
  10. Cheng, Y.,Fang, F. Z.*, Zhang, X. D., Hu, X. T., Design and fabrication of composite solar concentrator. Key Engineering Materials. 2011; 447-448: 366-370.

2010

  1. Cheng Y., Fang F. Z.*, Zhang X. D., Hu X. T., Design and fabrication of composite solar concentrator. Advanced Precision Engineering. 2010; 447-448: 366-70.
  2. Fang F. Z.*, Xu Z. W., Hu X. T., Wang C. T., Luo X. G., Fu Y. Q., Nano-photomask fabrication using focused ion beam direct writing. CIRP Annals-Manufacturing Technology. 2010; 59(1): 543-6.
  3. Fu Y. Q., Liu Y., Zhou X. L., Xu Z. W., Fang F. Z., Experimental investigation of super focusing of plasmonic lens with chirped circular nanoslits. Optics Express. 2010; 18(4): 3438-3443.
  4. Gong H., Fang F. Z.*, Hu X. T., Kinematic view of toot life in rotary ultrasonic side milling of hard and brittle materials. International Journal of Machine Tools & Manufacture. 2010; 50(3): 303-307.
  5. Gong H.*, Fang F. Z., Hu X. T., Cao L. X., Liu J. A., Optimization of tool positions locally based on the BCELTP for 5-axis machining of free-form surfaces. Computer-Aided Design. 2010; 42(6): 558-570.
  6. Xu Z. W.*, Fang F. Z., Zhang S. J., Zhang X. D., Hu X. T., Fu Y. Q., Li L., Fabrication of micro DOE using micro tools shaped with focused ion beam. Optics Express. 2010; 18(8): 8025-8032.
  7. Zhang X. D., Fang F. Z., Cheng Y., Wei G. S., High efficiency ultra-precision turning for complex aspheric mirrors. Nanotechnology and Precision Engineering. 2010; (4): 346-351.(in Chinese)
  8. Zhang X. D.*, Fang F. Z., Wei G. S., Cheng Y., Ultra-precision turning using same-body method for off-axis aspheric mirror. Mechanical Science and Technology for Aerospace Engineering. 2010, 29(11):1438-1442.
  9. Qiu Z. J., Fang F. Z., Shina T., Eda H., Chemical mechanical grinding for quartz glass. Optics and Precision Engineering. 2010; 18(7): 1554-1561.(in Chinese)
  10. Wei G. S., Zhang X. D., Fang F. Z., Hu X. T., In-situ measurement method based on ultra-precision machine for optical free-form surface. Optical Technique. 2010; (6): 829-833.(in Chinese)
  11. Wang H. B., Gong H., Fang F. Z., Study on rotary ultrasonic machining system. Aviation Precision Manufacturing Technology. 2010; (5): 39-41.(in Chinese)
  12. Zhao Q. Z., Qiu Z. J., Fang F. Z., Development of image processing system for diamond turning tool automatic grinding device. Diamond&Abrasives Engineering. 2010; (4): 38-41.(in Chinese)
  13. Zhang X. D., Fang F. Z., Cheng Y., Xu Z. W., Zhang S. J., Wei G. S., Ultra-precision machining of Fresnel elements fabricated by micro tools. Infrared and Laser Engineering. 2010; (3): 502-505.(in Chinese)
  14. Zhang S. J., Xu Z. W., Fang F. Z., Hu X. T., Fabrication of micro tool using focused ion beam milling technique. Transactions of Tianjin University. 2010; 43(5): 469-472.(in Chinese)
  15. Han T., Xu Z. W., Fang F. Z., Zhang S. J., Research into the CNT manufacturing technics based on focused ion beam/electron beam technique. Modern Manufacturing Engineering. 2010,(3);5-8.(in Chinese)
  16. Cheng Y., Fang F. Z., Zhang X. D., Ultra-precision turning of aspheric mirrors using error-decreasing amendment method. Optical Technique. 2010; (1): 51-55.(in Chinese)

2009

  1. Dai T. F., Fang F. Z.*, Hu X. T., Tool wear study in diamond turning of steels. Journal of Vacuum Science & Technology B. 2009; 27(3): 1335-1339.
  2. Fang F. Z.*, Xu Z. W., Zhang G. X., Hu X. T., Fabrication and configuration of carbon nanotube probes in atomic force microscopy. CIRP Ann-Manuf Techn. 2009; 58(1): 455-458.
  3. Wang Q. Y., Fang F. Z.*, Hu X. T., Development of three-axis desktop milling machine. Journal of Vacuum Science & Technology B. 2009; 27(3): 1278-1284.
  4. Wang Y. B., Wang C. L., Xing Q. R.*, Liu F., Li Y. F., Chai L., Wang Q. Y., Fang F. Z., Zhang X. D., Periodic optical delay line based on a tilted parabolic generatrix helicoid reflective mirror. Appl Optics. 2009; 48(11): 1998-2005.
  5. Xu Z. W., Fang F. Z.*, Configuration control of carbon nanotube probe in atomic force microscopy. Journal of Vacuum Science & Technology B. 2009; 27(3): 1388-1393.
  6. Xu Z. W.*, Fang F. Z., Fu Y. Q., Zhang S. J., Han T., Li J. M., Fabrication of micro/nano-structures using focused ion beam implantation and XeF2 gas-assisted etching. Journal of Micromechanics and Microengineering. 2009; 19(5): 977-986.
  7. Xu Z. W., Fang F. Z.*, Hu X. T., Fabrication of carbon nanotube probes in atomic force microscopy. Advances in Abrasive Technology. 2009; 76-78: 497-501.
  8. Zhang S. J., Fang F. Z.*, Xu Z. W., Hu X. T., Controlled morphology of microtools shaped using focused ion beam milling technique. Journal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures Processing, Measurement, and Phenomena, 2009; 27(3): 1304-1309.
  9. Zhang X. D.*, Fang F. Z., Wang H. B., Wei G. S., Hu X. T., Ultra-precision machining of sinusoidal surfaces using the cylindrical coordinate method. Journal of Micromechanics and Microengineering. 2009; 19(5): 1050-1055.
  10. Zhang Z. G., Fang F. Z.*, Hu X. T., Sun C. K., Three-dimensional molecular dynamics modeling of nanocutting. Journal of Vacuum Science & Technology B. 2009; 27(3): 1340-1344.
  11. Zhang Z. G., Fang F. Z.*, Hu X. T., Sun C. K., Molecular dynamics study on various nanometric cutting boundary conditions. Journal of Vacuum Science & Technology B. 2009; 27(3): 1355-1360.
  12. Zhang X. D., Fang F. Z., Cheng Y., Optimized design of cutting path for freeform surface in ultra-precision turning. Transactions of Tianjin University. 2009; 42(3): 278-282. (in Chinese)
  13. Xu Z. W., Fang F. Z., Zhang S. J., Han T., Li J. M., Fabrication of complicated micronano structures using focused ion beam milling method. Transactions of Tianjin University. 2009; 42(1):91-94.(in Chinese)
  14. Xu Z. W., Zhang S. J., Fang F. Z., Dong S., Chen Y. H., Effects of carbon nanotube probe mechanical properties on its performance. Chinese Journal of Scientific Instrument. 2009; 30(1):157-161.(in Chinese)
  15. Xu Z. W.,Fang F. Z., Zhang S. J., Chen Y. H., Fabrication of micro/nano structures using focused ion beam implantation technology. Transactions of the Heilongjiang University of Science and Technology. 2009; 28(1): 62-67. (in Chinese)
  16. YiM. B., Fang F. Z., Wang Q. W., Research on micro electrical discharge machining system and technics. Modern Manufacturing Engineering. 2009; (3):70-74. (in Chinese)
  17. Zhang X. D., Fang F. Z., Automatic processing algorithm of calibration pattern for structured light vision sensor. Chinese Journal of Sensors and Actuators. 2009; 22(10): 1426-1431. (in Chinese)
  18. Ni H., Gong H., Fang F. Z., Study on edge-chipping of brittle and hard materials in rotary ultrasonic machining. Manufacturing Technology. 2009; 45(5): 8-10. (in Chinese)
  19. Xu Z. W., Fang F. Z., Zhao T. Q., Dong S., Nano morphology of mice IgG protein with carbon nanotube probe. Journal of Tianjin University. 2009; 42 (10): 919-922. (in Chinese)

2008

  1. Ding X. Z.*, Zeng X. T., Liu Y. C., Fang F. Z., Lim G. C., Cr(1-x)Al(x)N coatings deposited by lateral rotating cathode arc for high speed machining applications. Thin Solid Films. 2008; 516(8): 1710-1715.
  2. Fang F. Z.*, Xu Z. W., Dong S., Study on phase images of a carbon nanotube probe in atomic force microscopy. Measurement Science & Technology. 2008; 19(5): 055051(1-7).
  3. Fang F. Z.*, Zhang X. D., Hu X. T., Cylindrical coordinate machining of optical freeform surfaces. Optics Express. 2008; 16(10): 7323-7329.
  4. Liu N.*, Zhang Y. M., Fang F. Z., A novel method of lens initial structure selection: study on structures-aperture relationship of finite image distance achromatic spherical microscope objective with larger numerical aperture. Optical Design and Testing Parts 1 and 2. 2008; 6834: A8343-A8343.
  5. Woon K. S., Rahman M.*, Fang F. Z., Neo K. S., Liu K., Investigations of tool edge radius effect in micromachining: A FEM simulation approach. Journal of Materials Processing Technology. 2008; 195(1-3): 204-211.
  6. Zhang G. X.*, Yao J. W., Qiu Z. R., Hu W. C., Fang F. Z., Li X. H., Large-scale space angle measurement. CIRP Annals-Manufacturing Technology. 2008; 57(1): 525-528.
  7. Fang F. Z., Wang L., Research on the cutting mold steel by applying ultrasonic vibration. Modern Manufacturing Engineering. 2008; (11): 54-58. (in Chinese)
  8. Xu Z. W., Fang F. Z., Wang J. H., The research of AFM probe used for DNA cutting. 2008; 6(8):37-39. (in Chinese)

2007

  1. Zhang Z. G., Fang F. Z.*, Sun C. K., Nano-scale cutting mechanism by molecular dynamics simulation. Design, Manufacturing, and Testing of Micro- and Nano-Optical Devices and Systems. 2007; 6724.
  2. Zhang S. J.*, Fang F. Z., Hu X. T., Advances of focused ion beam in micromachining technology. Design, Manufacturing, and Testing of Micro- and Nano-Optical Devices and Systems. 2007; 6724: E7240-E.
  3. Wang Q. Y.*, Fang F. Z., Hu X. T., Comprehensive review of micro/meso-scale machine tools. Design, Manufacturing, and Testing of Micro- and Nano-Optical Devices and Systems. 2007; 6724: K7241.
  4. Fang F. Z.*, Xu Z. W., Dong S., Zhang G. X., High aspect ratio nanometrology using carbon nanotube probes in atomic force microscopy. CIRP Annals-Manufacturing Technology. 2007; 56(1): 533-536.
  5. Fang F. Z.*, Wu H., Zhou W., Hu X. T., A study on mechanism of nano-cutting single crystal silicon. Journal of Materials Processing Technology. 2007; 184(1-3): 407-410.
  6. Fang F. Z., Liu Y., Pei Q. X., Method of examining surface cracks on monocrystalline silicon. Key Materials Engineering. 2007; 364-366: 902-924.

2006

  1. Wu H.*, Fang F. Z., Pei Q. X., Study on nanometric cutting mechanism and burr formation using molecular dynamics simulation. International Journal of Nanoscience. 2006; 5(4-5): 547-551.
  2. Pei Q. X.*, Lu C., Fang F. Z., Wu H., Molecular dynamics simulation of nanometric cutting process. International Journal of Nanoscience. 2006; 5(4-5): 633-638.
  3. Pei Q. X.*, Lu C., Fang F. Z., Wu H., Nanometric cutting of copper: A molecular dynamics study. Computational Materials Science. 2006; 37(4): 434-441.
  4. Fang F. Z.*, Xiong Z., Hui X. T., An experimental study of micromachining step-mirrors for laser-diode beam shaping. Journal of Micromechanics and Microengineering. 2006; 16(2): 214-218.
  5. Fang F. Z.*, Liu Y. C., Energy variation of micro-cracking on single crystal silicon. Advanced Laser Technologies Parts 1 and 2. 2006; 6344.

2005

  1. Fang F. Z.*, Wu H., Liu Y. C., Modelling and experimental investigation on nanometric cutting of monocrystalline silicon. International Journal of Machine Tools & Manufacture. 2005; 45(15): 1681-1686.
  2. Fang F. Z.*, Lee L. C., Liu X. D., Mean flank temperature measurement in high speed dry cutting of magnesium alloy. Journal of Materials Processing Technology. 2005; 167(1): 119-123.
  3. Fang F. Z. *, Ramesh K, Liu X. D., Polishing micro holes of optical fiber ferrules. Nanotechnology and Precision Engineering. 2005; 3(2):146-150.(in Chinese)

2.3 Conference papers

2019

  1. Paven Thomas Mathew, Fang F. Z.*, Periodic energy decomposition analysis for the application of electronic transport across a molecular junction, International PRN Conference, 2019.
  2. Honggang Zhang, Nan Zhang, Fang F. Z., Development of high hardness, self-lubrication nickel/graphene oxid compresite coating using ultrasonic assisted electrodeposition. International PRN Conference, 2019.
  3. Haoyang Zhang, Fang F. Z., Michael D. Gilchrist, Nan Zhang., Precision replication of micro lensed arrays using variotherm and in-mould micro compression assisted injection mouldiddng. International PRN Conference, 2019.

2018

  1. Yan G. P., You K. Y., Fang F. Z.*, Ultraprecision grinding of small-aperture concave aspheric mould insert with tilt axis method, 4th CIRP Conference on Surface Integrit. 2018.
  2. Zhang H. Y., Fang F. Z., Gilchrist M., Zhang N., Experimental and numerical study of the filling of a micro feature based on a microfluidic flow cytometer chip using micro injection moulding, 6th International Conference on Nanomanufacturing (nanoMan2018 ). 2018.
  3. Lv P., Lai M., Zhang J. F., Fang F. Z., Characterization of Lu2O3 surface processed by plasma-assisted etching. 6th International Conference on Nanomanufacturing (nanoMan2018 ). 2018.
  4. Yuan Y. K., Gu C. Y., Yan G. P., Fang F. Z., Mechanical property and modal analysis of ultra-thin mirrors, National Academic Forum for PhD Students in Instrumental Science, Optical Engineering and Biomedical Engineering. 2018.

2017

  1. Li Z. X., Fang F. Z., Zhu L. L., Huang S. Y., Zhang X. D., Tool srvo asisted utra-precision turning of freeform optics on infrared materials, 7th International Conference of Asian Society for Precision Engineering and Nanotechnology (ASPEN2017). 2017.
  2. Zhang Y., Fang F. Z., Song L., Study on performance evaluation for collimating lens of laser diode, 7th International Conference of Asian Society for Precision Engineering and Nanotechnology (ASPEN2017). 2017.

2016

  1. Xu Z. W., Fang F. Z*. Wu W., Li W. L., He S. T., Hu M. L., Removal of nanoscale damage induced by FIB nanofabrication on single-crystal diamond using femtosecond laser treatment, Proceedings of the 16th International Conference of the European Society for Precision Engineering and Nanotechnology. 2016.
  2. Liu X. L., Zhang X.D., Fang F. Z., Machining errors analysis based on the optical performance evaluation in ultra-precision turning. 5th International Conference on Nanomanufacturing (nanoMan2016). 2016.
  3. Xu F. F., Wang J. S., Zhang X.D., Fang F. Z., Study on tool edge shape effect in nano-cutting. 5th International Conference on Nanomanufacturing (nanoMan2016). 2016.
  4. Gao H. M., Zhang X.D., Fang F. Z., Axicon profile metrology using contact stylus method. 5th International Conference on Nanomanufacturing (nanoMan2016). 2016.
  5. Pang K., Song L., Fang F. Z., Zhang Y., Zhang H. Y., Large field of view curved compound eye imaging system using optical freeform surface. 5th International Conference on Nanomanufacturing (nanoMan2016). 2016.
  6. Lai M., Zhang X.D., Fang F. Z., Crystal orientation effect on the subsurface deformation of monocrystalline germanium in nanometric cutting. 5th International Conference on Nanomanufacturing (nanoMan2016). 2016.
  7. Zeng Z., Zhang X.D., Fang F. Z., Interferometry system calibration with a reflective spatial light modulator for optical surface. 5th International Conference on Nanomanufacturing (nanoMan2016). 2016.
  8. Jiang L. L., Zhang X.D., Fang F. Z., Non-linear phase error compensation for fringe deflectometry measuring system. 5th International Conference on Nanomanufacturing (nanoMan2016). 2016.
  9. Wang J. S., Zhang X.D., Fang F. Z., Effects of the amorphous layer thickness on nanometric cutting. 5th International Conference on Nanomanufacturing (nanoMan2016). 2016.

2014

  1. Gong H., Pan L., Li Z.J., Fang F. Z., Study on a novel ultrasonic device for diamond turning. 4th International Conference on Nanomanufacturing (nanoMan2014). 2014.

2013

  1. Chen X. W., Zhang X. D., Fang F. Z., Lai M., Xu F. F., Effect of crystal orientations on nanocutting based on quasicontinuum multiscale method. International Conference on Multimedia Technology (ICMT). 2013.

2012

  1. Zhang H. X.*, Zou C. G., Song L., Zhang X. D., Fang F. Z., Jia D. G., Zhang Y. M., Curved compound eye imaging system with a large field of view based on a plano-concave substrate. Proc. Advanced Optical Manufacturing and Testing Technologies (AOMATT). 2012.
  2. Zhang H. X.*, Zou C. G., Song L., Zhang X. D., Fang F. Z., Jia D. G., Zhang Y. M., Curved compound eye imaging system with a large field of view based on a plano-concave substrate. 6th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Design, Manufacturing, and Testing of Smart Structures, Micro- and Nano- Optical Devices, and Systems. 2012.
  3. Wang Q. C., Zhang X. D., Peng Y., Fang F. Z., Data filtering of optical freeform measurement based on a modified 2D cascaded approximating spline filter. 6th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies. 2012.
  4. Zhang H. X.*, Zou C. G., Song L., Zhang X. D., Fang F. Z. Jia D.G., Zhang Y. M., Curved compound eye imaging system with a large field of view based on a plano-concave substrate. Advanced Optical Manufacturing and Testing Technologies (AOMATT). 2012.

2011

  1. Zhang X. D., Li P., Fang F. Z.*, Wang Q. C., Ultra-precision turning of complex spiral optical delay line. International Conference on Optical Instruments and Technology: Solid State Lighting and Display Technologies, Holography, Speckle Pattern Interferometry, and Micro/Nano Manufacturing and Metrology. 2011.

2007

  1. Liu N., Zhang Y. M., Fang F. Z., A novel method of lens initial structure selection:study on strcture-aperture relationship of finite image distance achromatic spherical microscope objective with larger numerical aperture-art. Optical Design and Testing III. 2007.
  2. Zhang Z. G., Fang F. Z.*, Sun C. K., Nano-scale cutting mechanism by molecular dynamics simulation. 3rd International Symposium on Advanced Optical Manufacturing and Testing Technologies: Design, Manufacturing, and Testing of Micro- and Nano-Optical Devices and Systems. 2007.
  3. Wang Q. Y.*, Fang F. Z., Hu X. T., Comprehensive review of micro/meso-scale machine tool-art. 3rd International Symposium on Advanced Optical Manufacturing and Testing Technologies: Design, Manufacturing, and Testing of Micro- and Nano-Optical Devices and Systems. 2007.
  4. Zhang S. J.*, Fang F. Z., Hu X. T., Advances of focused ion beam in Micromachining Technology. 3rd International Symposium on Advanced Optical Manufacturing and Testing Technologies: Design, Manufacturing, and Testing of Micro- and Nano-Optical Devices and Systems. 2007.

2006

  1. Fang F. Z., Liu Y. C., Hu X., Machining monocrystalline silicon without cracks. The 1st Topical Meeting on Microfactories. 2006.

2005

  1. Fang F. Z.*, Liu Y. C., Energy variation of micro-cracking on single crystal silicon. Advanced Laser Technologies. 2005.

2.4 Books and chapters

  1. Fang, F.Z., Xu, Z.W., Ion Beam Machining. In: CIRP Encyclopedia of Production Engineering. Edited by Laperrière L, Reinhart G. Berlin. Springer Berlin Heidelberg; 2018. ISNM: 9783642359507.
  2. Fang F. Z., Zhang N., Microstructure. In: CIRP Encyclopedia of Production Engineering. Edited by The International Academy for Produ, Luc Laperriere, Gunther Reinhart, Springer Berlin Heidelberg; 2017. ISBN: 9783642359507.
  3. Fang F. Z., Xu Z. W., Ion Beam Machining. In: CIRP Encyclopedia of Production Engineering. Edited by Laperrière L, Reinhart G. Berlin. Springer Berlin Heidelberg; 2014. ISBN: 9783642206160.
  4. Fang, F. Z., B. Ju, Scanning Tunneling Microscopy, In: CIRP Encyclopedia of Production Engineering. Edited by Laperrière L, Reinhart G. Berlin. Springer Berlin Heidelberg; 2014. ISBN: 9783642206160.
  5. Fang F. Z., Zhu P., Molecular Dynamics. In: CIRP Encyclopedia of Production Engineering. Edited by Laperrière L, Reinhart G. Berlin. Springer Berlin Heidelberg; 2014. ISBN: 9783642206160.
  6. Fu Y. Q., Fang F. Z., Xu Z. W., Nanofabrication and Characterization of Plasmonic Structures. In: Nanofabrication. Edited by Yoshitake M. InTech; 2011. ISBN: 9789533079127.
  7. Fang F. Z., Gong H., Zhang X. D., Guo T., Key Technologies in Machining Complex Surfaces. In: Report of Mechanical Engineering Development. Science and Technology Publisher, 2009. ISBN: 9787504649379. (in Chinese).
  8. Fang F. Z., Liu K., Kurfess T. R., Lim G. C., Tool-based Micro Machining and Applications in MEMS. In: MEMS/NEMS: Handbook Techniques and Applications. Edited by Leondes C. T., Boston M. A. Springer US; 2006. ISBN: 9780387245201.
  9. Xu Z. W., Fang F. Z. Zeng G. S., Focused Ion Beam Nanofabrication Technology. In: Handbook of Manufacturing Engineering and Technology. Edited by Andrew Nee. Springer London. 2014. ISBN: 9781447149767.
  10. Fang F. Z., Introduction to Nanomanufacturing Using Ion Beam Technology. In: Handbook of Manufacturing Engineering and Technology. Edited by Andrew Nee. Springer London. 2014. ISBN: 9781447149767.
  11. Fang F. Z., Xu Z. W., State-of-the-Art for Nanomanufacturing Using Ion-Beam Technology. In: Handbook of Manufacturing Engineering and Technology. Edited by Andrew Nee. Springer London. 2014. ISBN: 9781447149767.
  12. Wu W., Li W. L., Fang F. Z., Xu Z. W., Microtool Fabrication by Focused Ion Beam Technology. In: Handbook of Manufacturing Engineering and Technology. Edited by Andrew Nee. Springer London. 2014. ISBN: 9781447149767.
  13. Xu Z. W., Fang F. Z., Dong S., Carbon Nanotube AFM Probe Technology. In: Electronic Properties of Carbon Nanotubes. Edited by Marulanda J. M. InTech. 2011. ISBN: 9789533074993.

2.5 Patents

2019

  1. Fang F. Z., Lv P., Zhang J. F., Plasma modified etching assisted polishing method for laser crystal, in progress.
  2. Gu C. Y., Fang F. Z., Yuan Y. K., A gravity measurement device and method based on optical levitation, in progress.
  3. Zhao Y. B., Yuan Y. K., Gu C. Y., Fang F. Z., A 3D modeling method of diffractive optical element based on matrix transformation, in progress.
  4. Zhang X. D., Zhu L. L., Wu G. C., Fang F. Z., A high precision measurement system for large curvature and range freeform surface, in progress.
  5. Zhang X. D., Wu G. C., Zhu L. L., Fang F. Z., An auto-focusing and tracking surface measurement system, in progress.

2018

  1. Yan G. P., You K. Y., Fang F. Z., A method of generation of toolpath for turning freeform surface using cutter location points projection, 2018.8.28, China, 201810986854X.

2017

  1. Yan G. P., Fang F. Z., 2017.12.15, China, 2017113509988.
  2. Jia Z. G., Fang F. Z., Xu K., Method and device for detecting glasses based on wavefront analysis, 2017.6.26, China, 2017104956925.
  3. Zhang N., Zhang H. Y., Fang F. Z., A method for precise polymer injection molding of optical device with complex surface, 2017.5.26, China, 2017103846877.
  4. Zhang X. D., Wang J. S., Fang F. Z., A controllable method for ultra-precision turning of crystal, 2017.5.19, China, 2017103586329.
  5. Fang F. Z., Wang J. S., Zhang X. D., Ultra precision machining method of crystal materials based on the mechanism of ion irradiation electron energy loss, 2017.5.9, China, 2017103219531.

2016

  1. Fang F. Z., Zhang N., Zhang X. D., Plasma assisted etching processing for laser crystal, 2016.10.27, China, 2016109596584.
  2. Zhang X. D., Lu Y. B., Fang F. Z., Liu X. L., A method of processing aperture - array for biomimetic compound eye imaging system, 2015102197305.
  3. Zhang X. D., Fang F. Z., Design and manufacture of a virtual reality eyepiece, 2016108874972.

2015

  1. Zhang X. D., Fang F. Z., A manufacturing method of microstructure array device, 2015.04.22, 2015101940466.
  2. Fang F. Z., Zhang H. Y., Song L., An device for removing intravascular plaque, December 2015, CN2015210403210, Licensed.
  3. Xu Z. W., Li K., Fang F. Z., Gao T. T., Shen X. Q., Xu X. X., An optimized processing method of SERS substrate with FIB, April 2015, CN2014101285520, Licensed.

2014

  1. Fang F. Z., Particle beam-assisted ultra-precision machining method for single-crystal brittle materials, September 2014, US.13/159,811, licensed.
  2. Fang F. Z., Beam assisted ultra-precision machining method for crystal brittle materials, Tianjin University, September 2014, JP.2012-511130, licensed.
  3. Fang F. Z., Xu Z. W., Shen X.C., Manufacturing method of templates for calibrating precision microscopy equipment limiting resolution, April 2014, CN 201310756423, licensed.
  4. Fang F. Z., Zhu P. Z., Wan Y., Multi-axis system error modeling and measuring device based on optical free-form surface, April 2014, CN 201320494963.2, licensed.

2013

  1. Qiu Z. J., Zheng H., Zhao H. X., Fang F. Z., Ultrasonic auxiliary micro injection molding, March 2013, CN 201110027108.6, licensed.
  2. Xu Z. W., Wu W., Fang F. Z., Li W. L., Method for effectively recovering damage of ion implantation diamond, February 2013, CN 201310043955.0 . licensed.
  3. Qiu Z. J., Gao S., Zou D. C., Fang F. Z., Constant pressure ultrasonic wave aiding magnetorheological finishing method and device, April 2013, CN 201210594943.2, Processing.
  4. Qiu Z. J., Yang X., Yi. P., Fang F. Z., Special grinding fluid for ductile regime lapping of optical glass and its preparation method, March 2013, CN 201210513070.8, licensed.
  5. Fang F. Z., Song L., Zhang H. X., Zou C. G., Fan Y., Multilayer curve compound eye type imaging system with large visual field of 180°, February 2013, CN 201210536921.0, Processing.
  6. Fang F. Z., Song L., Luo C., Huang J. X., Compound eye type panorama continuous tracking and monitoring system, May 2013, CN 201310040992.6 , Processing.
  7. Xu Z. W., Wu W., Fang F. Z., Li W. L., Manufacturing method of sharp cutting edge of micro cutting tool, May 2013, CN 201310020611.8, Processing.

2012

  1. Fang F. Z., Xu H. Y., He X. G., Reflex telescope, December 2012, CN 201210239475.7, licensed.
  2. Fang F. Z., Song L., Zhang S. S., Zhang X. D., Zhang X., Large field-of-view bionic compound eye visual system adopting dome light cone. December 2012, CN 201210239472.3, licensed.
  3. Zhang X. D., Fang F. Z., Jiang L.L., Gao H. M., Method for evaluating surface precision of microarray structure optical device, June 2012, CN2012102186735, licensed.
  4. Fang F. Z., Lu Y. B., Zhang X. D., Fabrication method of efficient back reflection cubic angle micro prism, July 2012, CN 201210047015.4, licensed.
  5. Song L., Fang F. Z., Yu L. T., Cao M. C., Zhu H. Q., Yin H., High-speed image acquiring method, November 2012, CN 201210229855.2, licensed.
  6. Zhang X. D., Fang F. Z., Wu Q. Q., In-situ measurement method for optical free-form surface, October 2012, CN 201210199105.5, licensed.
  7. Zhang X. D., Fang F. Z., Guo Y. W., Method for optimizing surface type parameters of optical free-form-surface prism based on machining tolerance constraints, October 2012, CN 201210219482.0, licensed.
  8. Zhang H. X., Zou C. G., Song L., Zhang X. D., Fang F. Z., Inner-side curved-surface fly’s-eye lens capable of enlarging field angle, August 2012, CN 201210081341.7, licensed.
  9. Fang F. Z., Zhang X. D., Wang Q. C., Compensation machining method for optical free-form surfaces, July 2012, CN 201210046864.8, licensed.

2011

  1. Qiu Z. J., Ding L. Y., Li Z. T., Fang F. Z., Relief angle adjustable device for automatic grinding of arc-edge diamond lathe tool, November 2011, CN 201110210266.5, licensed.
  2. Zhang X.D., Fang F. Z., Ultraprecise turning method of optical lens with incline, June 2011, CN 201110023023.0, licensed.
  3. Zhang X. D., Fang F. Z., Cheng Y., Microprism with retroreflection property and mould manufacturing method thereof, September 2011, CN 201110091533.1, licensed.
  4. Fang F. Z., Cheng Y., Zhang X.D., Method for designing reflection-type optical integrator based on parabolic mirror array, July 2011, CN 201110067899.5 , licensed.
  5. Fang F. Z., Cheng Y., Zhang X. D., Design method of reflective optical integrator based on planar mirror array, July 2011, CN 201110067896.1, licensed.
  6. Fang F. Z., Zhang X. D., Method for processing free-form surface prism, August 2011, CN 201110023102.1, licensed.
  7. Zhang X. D., Fang F. Z., Cheng Y., Isosceles micro prism and method for manufacturing mold, August 2011, CN 201110074646.0, licensed.

2010

  1. Fang F. Z., Zhang X. D., Precision turning processing method for off-axis aspheric mirror with large off-axis, Novermber 2010, CN 2010105305559, licensed.
  2. Fang F. Z., Qiu Z. J., Precise combined-machining equipment for complicated profiles made of hard and brittle materials, December 2010, CN2010105770781, licensed.
  3. Fang F. Z., Zhang X. D., Lu Y. B., Measuring method for in-site measurement of free-form curved surface based on machining machine tool, Novermber 2010, CN2010105307766, licensed.
  4. Fang F. Z., Xu Z. W., Wu W., Method for accessorily obtaining minitype cutter with high-accuracy cutting edge by utilizing film coating technology, June 2011, CN 201010562861.0, licensed.
  5. Fang F. Z., Xu Z. W., Xiao Y. J., Method for reinforcing lateral rigidity of hanging nanotube device through electron beam induced metal deposition, May 2011, CN 201010563410.9, licensed.
  6. Xu Z. W., Fang F. Z., Gao H. F., Method for enhancing lateral stiffness of multi-walled nanotube device by irradiation of electron beam, May 2011, CN 201010572940.X, licensed.
  7. Zhang X. D., Fang F. Z., Cheng Y., Ultra-precision in-situ measurement device based on flexible probe and ultra-precision processing method, January 2010, CN2010100313173, licensed.
  8. Fang F. Z., Zhang H. W., Qiu Z. J., Hu X. T., Method for inhabiting abrasion of monocrystalline diamond cutter under action of multiple physical fields in ultraprecise processing, September 2010, CN 201010129448.5, licensed.
  9. Zhang X. D., Fang F. Z., Yang C. P., Lu Y. B., Triangle diamond cutter angle high-precision automatic measuring system and measuring method, June 2010, CN 200910312125.7, licensed.
  10. Fang F. Z., Zhang Z. G., Three-dimensional nanometer-grade cutting simulation method based on molecular dynamics, February 2010, CN 200910306574.0, licensed.

2009

  1. Fang F. Z., Wang Q., Xu Z. W., Hu X. T., Method for electric discharge machining of micronanometer three-dimensional structure of nanowire or nanotube and system thereof, February 2010, CN 200910069561.6, licensed.
  2. Fang F. Z., Xu Z. W., Wang Q., Hu X. T., Method and system of micro three-dimensional structure by micro-nano electric discharge machining, March 2010, CN 200910307013.2 , licensed.
  3. Zhang X. D., Fang F. Z., Automatic alignment system and method of workpiece and main shaft rotation centre in ultra-precision turning, September 2010, CN 200910312371.2, licensed.
  4. Fang F. Z., Zhang S. J., Xu Z. W., Hu X. T.,  Method for preparing micro cutter based on focused ion beam technology, September 2009, CN 200910067983.X , licensed.
  5. Fang F. Z., Chen Y. H., Xu Z. W., Qiu Z. J., Zhang X. D., Dai T. F., Hu X. T., Particle beam assisted single-crystal fragile material ultraprecise processing method, October 2009, CN 200910069010.X , licensed.
  6. Fang F. Z., Zhang X. D., Cheng Y., High-efficient retroreflective microprism and manufacturing method of mold thereof, October 2009, CN 200910068685.2, licensed.
  7. Fang F. Z., Xu Z. W., Hu X. T., Micro-nano fabrication method for auxiliary etch by combining focused ion beam injection and xenon fluoride gas, June 2009, CN 200910067643.7, licensed.

2008

  1. Fang F. Z., Zhang X. D., Compound eye structure optical elements turning method, July 2008, CN 200810052056.6 , licensed.

2007

  1. Fang F. Z., Zhang X. D., Ultra-precise turning method with diamond knife tool hook angle compensation, August 2008, CN 200710058344.8, licensed.
  2. Fang F. Z., Zhang X. D., Ultra-precise cutting tool selection method, May 2008, CN 200710058345.2, licensed.
  3. Fang F. Z., Xu Z. W., Zhang S. J., Han T., Li J. M., Method for accurately controlling suspended nanometer tube device direction, August 2008, CN 200710060332.9, licensed.

2005

  1. Fang F. Z., Machining method for micro abraders and micro abraders produced thereby, Filed in the United States, 2005, US 20050183546A1.

© 2018. All rights reserved. Centre of Micro Nano Manufacturing Technology

Powered by Hydejack v8.1.1